Eight top tips for working at height
Matthew Bailey, Divisional Manager, Inspection and Certification at HCL Safety, offers his top tips to consider before working at height and explains why professional inspection and certification can contribute to safer working. |
[edit] Introduction
There were 35 fatal injuries to workers due to falls from height in 2017/18, according to the Health and Safety Executive (HSE) statistics. The potential risks associated with working at height are plain to see, but thorough preparation and close attention to detail has and will continue to help reduce this figure.
[edit] 1. Pay attention to legislation
There are many ways to mitigate these risks but first and foremost, they must be implemented from a deep understanding of all relevant legislation. Doing so will not only help to mitigate potential risks but help ensure that those responsible for the safety of those that work at height are acting in accordance with HSE guidance. The HSE states, for example, that those in control of any work at height activity must make sure that work is properly planned, supervised and carried out by competent people.
[edit] 2. Always carry out a comprehensive pre-use inspection
Those that work at height who have received quality training will be competent and well-equipped to carry out a thorough pre-use inspection of all equipment before any work at height takes place. They will also be able to check whether all relevant certification is in place. This is essential. Annual inspections and formal checks should also be carried out by third-party suppliers on a regular basis. Although typically this is annually, it depends on the application and frequency of use (among other factors).
[edit] 3. Mitigate the risks
Follow the hierarchy of control for working at height which means, if at all possible, eliminate the risk entirely. If it is unavoidable, then select colllective measures to help prevent falls (such as guardrails and working platforms). If this is not possible, then minimise the distance and consequences of a fall by working in fall restraint. Working in fall arrest should be a last resort.
[edit] 4. Select the right equipment for the right job
For work to be carried out safely and efficiently, the absolute right equipment for the job must be in place, whether that be permanent or temporary guardrails, fall restraint or fall arrest equipment. All equipment must also be mutually compatible, such as personal protective equipment (PPE) and engineered systems. It is vital to recognise that a 'one-size-fits-all' approach will often not improve employee wellbeing or safety. If items cannot be used in unison and/or do not fit properly, it could lead to inadequate protection.
[edit] 5. Ensure equipment is high quality
All equipment used should be designed and manufactured in compliance with essential health and safety requirements. Achieve peace of mind that this is the case by partnering with a quality, reputable manufacturer and choose equipment based on the job at hand: Can it be done from ground level? What space is available? What are the risks? Asking pertinent questions will help when selecting equipment and ultimately, help mitigate risks.
[edit] 6. Have a rescue plan in place
Importantly, when working within fall arrest, together with all relevant PPE, a rescue plan, in accordance with section seven of the Working at Height Regulations 2005, must be in place. It is not just the responsibility of the emergency services. Furthermore, any delay in the emergency services arriving on site could be critical for the worker. Assistance in the development and implementation of a comprehensive rescue plan is a typical by-product of top-quality training.
[edit] 7. Do nothing without training
Employers have a responsibility under the Health and Safety at Work Act 1974 to provide suitable information, instruction and training for their employees. Training gives those that work at height the confidence, knowledge and skills required to carry out their work safely and efficiently. High quality training should cover both work at height theory and practical exercises, including proper inspection of PPE and the execution of relevant risk assessments and method statements.
[edit] 8. Got your PPE?
PPE plays a vital role in mitigating the potential risks associated with working at height. The PPE chosen should be appropriate for the job at hand, safe and comfortable. A more comfortable worker typically makes for a more productive worker. All PPE should be suitable for the work activity being undertaken and also the prevailing environmental conditions. Compatibility with other fall protection equipment is also vitally important.
[edit] About this article
This article was written by Matthew Bailey, Divisional Manager, Inspection and Certification at HCL Safety. It was previously published in July 2019 on the website of the Chartered Institute of Architectural Technologists (CIAT) and can be accessed here.
[edit] Related articles on Designing Buildings Wiki
- Construction site.
- Construction site inspection.
- Crane regulations.
- First aider.
- Hazardous substances.
- Health and safety.
- Injuries on construction sites.
- Lighting of construction sites.
- Personal protective equipment.
- Risk of rats in construction.
- Safety management.
- What is a hazard?
--CIAT
Featured articles and news
What it is and how to use it.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
BSRIA Building Reg's guidance: The second staircase
An overview focusing on aspects which most affect the building services industry.
Design codes and pattern books
Harmonious proportions and golden sections.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.